Jinzhou Shuangxing Railway Machinery Co., Ltd.

Rail Tensioning Machine Sales_Rail Tensioner_Hydraulic Rail Tensioning Machine for Railways
Liaoning Shuangxing Railway Machinery Co., Ltd. was founded in 2007, covering an area of 10,000 square meters, with more than 100 permanent employees. Among them, the name of the engineering and technical personnel. Fixed assets are more than 10,000 yuan.
Liaoning Shuangxing focuses on technological progress, adheres to the strategic thinking of scientificity, standardization, and sustainable development, and takes responsibility, gratitude, dedication, and integrity as the company's core values. It has successively won the title of Private Enterprise Integrity Unit , price integrity unit and other honors, we warmly welcome new and old friends from all walks of life at home and abroad to negotiate trade, win-win cooperation and create brilliance together.
Rail Tensioning Machine Sales_Rail Tensioner_Hydraulic Rail Tensioning Machine for Railway
Liaoning Shuangxing has twenty years of professional manufacturing
Customer Consultation
Contact: Manager Zhang< br/> Address: Anshan City, Liaoning Province
Office
Fax
Technical Service
Striving to create the industry's leading brand Liaoning Shuangxing
Rail stretching machine sales_rail stretching Equipment_Hydraulic rail stretching machine for railways
Detailed parameters
Rail stretching machine sales_Rail stretching machine_Hydraulic rail stretching machine for railways
Operation method
, Rail pulling During operation, drive the piston rod to the required length according to the need to adjust the distance.
Assemble the machine tool at the joint of the two rails, and put the inclined iron into the clamping groove along the top surface of the rail.
Connect the oil pipe correctly according to the picture above.
. Start the pump station, run it without load for about a minute, connect the oil pipes of the oil cylinder, and first extend the piston rods of the two oil cylinders to a position greater than the predetermined stretch length. Move the handle to the oil supply position and adjust the handle to allow hydraulic oil to enter the rod cavity cylinder. The rod cavity of the cylinder is continuously pressurized to supply oil. The piston rod shrinks to drive the clamping seat and rail to move until the operation requirements are met.
After the adjustment operation is completed, open the handle or move the handle to the unloading position, that is, the operation is completed.
, close the pump station, exit the inclined iron, and remove the machine tools.
When not working, the piston rod should be fully retracted into the cylinder.
. The air in the cylinder should be drained before use to ensure the normal operation of the hydraulic system.
① Hydraulic oil requires the use of viscosity spindle oil or hydraulic oil, which should be replaced once a year.
② All parts of the hydraulic system, such as pump stations, oil cylinders, oil pipes, joints, etc., should be kept clean at all times. When the high-pressure oil pipe is not in use, the two joints should be sealed in special plastic bags to prevent dust and debris from entering.
③ Due to long-term use, high-pressure oil pipes are prone to aging and reduced strength. They should be inspected regularly and replaced regularly. The pressure gauge should be calibrated according to regulations.
④ The inclined iron is a wearing part and should be inspected frequently. If cracks occur, the tooth pattern is severely worn, and the clamp rail slips, it should be replaced in time.
⑤ If the machine will not be used for a long time, the machine should be rust-proofed and stored in a ventilated, dry, and non-corrosive gas warehouse. After the electric pumping station is affected by moisture or rain, the insulation resistance of the electrical device of the electric pumping station should be measured with a megger before use. The insulation resistance of the electrical device to the base should not be less than &.
⑥The power cord, plug, socket and switch of the electric pump station should be intact, with normal contact and reliable switch.
⑦ When using the oil cylinder for the first time or after repairing the oil cylinder, the air in the oil cylinder should be exhausted before stretching the rail.
Rail stretching machine sales_Rail tensioner_Hydraulic rail stretching machine for railway
Liaoning Shuangxing after-sales service commitment
Service tenet: fast, decisive, accurate, thoughtful and thorough.
, Service goal: Service quality wins user satisfaction.
Service efficiency: If the equipment fails during or outside the warranty period, after the supplier receives notification, maintenance personnel can arrive at the site and start repairs within hours.
Service principle: The product warranty period is one to twelve months. During the warranty period, the supplier will repair and replace parts damaged due to quality reasons free of charge. If parts are damaged outside the warranty period, the accessories provided will only Cost fees are charged. Equipment damage caused by human factors on the demand side, and repairs or accessories provided by the supplier will be priced at cost.
Liaoning Shuangxing produces and sells the following products
☆Railway transportation: internal combustion tamping picks, tamping machines, hydraulic rail drilling machines, hydraulic rail drilling machines, manual rail drilling machines, rack type Track starter, hydraulic track starter, rail cutting machine, square sleeper, hydraulic rail straightener, rerailer, universal gauge ruler, rail grinder, square ruler, rail transport car, etc.
☆Track accessories: blocks Plate, turnout, turnout accessories, turnout tie rod, track gauge, track gauge, track gauge, track gauge, anchor rod, b anchor drill pipe, b pneumatic drill pipe, turnout pad, track splint, road stud, insulation Plywood, crossover line switches, pads, composite rubber pads, track fixings rail clamps, gauge tie rods, guard rail buckle plates, line buckle plate bases, insulated gauge rods, buckle plates, twist drill pipes, coal drill pipes, Twist drill pipe, connecting sleeve, chain spreader, wind drill, anchor pallet, pallet, nylon baffle seat, manual switch, manual bender, bender, bending machine, rail clamp plate, Fish plate, fish bolt, etc.
Liaoning Shuangxing sales network Hebei, Shanxi, Inner Mongolia, Liaoning, Jilin, Heilongjiang, Beijing, Tianjin, Shanghai, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Chongqing, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Ningxia, Xinjiang and other places.
Note: The above content is provided by Liaoning Shuangxing Railway Machinery Co., Ltd. Related product parameters and pictures are for reference only. Specific products may have different origins due to different production batches. Please contact the sales staff for specific details.